Temperature Display; First Use - Silvercrest SEM 1100 B3 Operating Instructions Manual

Temperature display

The temperature indicator 2 indicates how far the appliance has heated up .
As soon as you switch the appliance on, it starts heating up until the pointer is
approximately in the middle between 80°C and "
When the pointer reaches the red portion of the scale, the temperature is high
enough to prepare an espresso . The green heating-up control lamp 5 lights up .
If you press the "Steam" button
goes out, and the appliance continues heating up until it reaches the range on the
scale between "
Once the pointer reaches the range between "
is high enough to produce steam . The green heating-up control lamp 5 lights up .

First use

1) Clean the sieve holder u, the measuring spoon p, the espresso sieve i o,
the drip grille q and the water tank 9 as described in the section "Cleaning
and Care" .
2) Place the appliance on a level and heat-resistant surface . Ensure that a mains
power socket is in the vicinity .
3) Insert the drip grille q so that the red float e can protrude through the hole
in the drip grille q .
4) Place the sieve holder u in the appliance by inserting the "INSERT" mark,
which is located next to the hot water shower r, into the appliance and then
turning it clockwise until the handle of the sieve holder u is facing the front
("
SEM 1100 B3
" and " " .
LOCK" mark) .
" .
4 the green heating-up control lamp 5
" and " ", the temperature
GB │ MT │ 81 ■