Required Tools, Measurement And Auxiliary Devices - Siemens SIREMOBIL Iso-C Maintenance Instruction

8
1.3

Required tools, measurement and auxiliary devices

NOTE
Tool
•
Standard tool kit*
•
Set of Allen wrenches*
•
Spring balance rated for up to 200
N
•
Leakage current measuring device
•
Protective conductor meter
•
Internal line resistance meter
•
DVM
•
Luminance meter
•
Densitometer (if MULTISPOT 2000
option is available)
•
Dose meter
•
Dynamic test kit
•
Precision X-ray filter
•
Set of resolution tests
•
Set of radiation filters (10 x 0.3 mm)
•
Set of radiation filters
•
25 mm AL measuring stand, type 26765 acc. to DIN 6868 Part 50*
or
1.2 mm Cu (e.g., from set of radiation filters 44 06 120) plus
•
17 Micrometer Cu strip
•
Centering cross (only with Diamen-
tor)
•
Calibration phantom (if 3D recon-
struction option is available)
•
Service PC
•
Cable for connecting service PC to
host
SIREMOBIL Iso-C
The indicated items are listed in the STC (Service Tools Catalog)
unless otherwise stated (the STC is a component of the Spare
Parts Catalog) with the exception of items marked with "*".
SPR2-230.101.02.06.02
07.05
General Information
For example
Safety tester Unimet 1100
Safety tester Unimet 1100
Fluke 187
e.g., SPOTMETER for SMfit
ACT
PTW Diados
Page 8 of 46
CS PS 24
Material no.:
44 15 113 RH090
51 38 727
51 38 727
84 28 104 Y4337
99 94 831
77 52 848
97 02 416 Y1996
97 17 612 Y0388
37 90 156 X1963
99 00 598 XE999
28 71 820 RE999
44 06 120 RV090
97 98 596 G5321
11 67 662
96 60 051 RE999
75 51 620 G5486
99 00 440 RE999
Siemens AG
Medical Solutions