Siemens SIREMOBIL Iso-C Maintenance Instruction page 24

24
Technical safety checks, test certificate
of the check
3.2.1 Leakage current measurement
3.2.2 Equivalent leakage current measure-
ment
3.3 Patient leakage current or equivalent
patient leakage current measurement
3.3.1 Patient leakage current measurement n.a.
3.3.2 Equivalent patient leakage current
measurement
4. Mechanical checks
4.1 Are all wall, ceiling and floor mountings
secure and undamaged?
4.2 Are all mechanically moved system
parts clean and running smoothly (lubri-
cated, if required)?
4.3 Are the wire cables, belts and spindles
free of wear and tear?
4.4 Mobile equipment: Are the wheels, roll-
ers and brakes OK?
4.5 Is there any unusual noise during oper-
ation (e.g., gearing)?
5. Functional checks
5.1 Function of the Emergency Stop switch 3. Mechanical safety, check:
SIREMOBIL Iso-C SPR2-230.101.02.06.02
07.05
General Information
Maintenance instructions for the
check/comments
3. Electrical safety, check:
SIE Leakage current
5.1 Final work steps, check:
SIE Leakage current
n.a.
n.a.
n.a.
n.a.
3. Mechanical safety, check:
SIM Monitor(s) / displays
3. Mechanical safety, checks:
SIM Covers
SIM C-arm
SIM Lifting column
3. Mechanical safety, checks:
SIM Lifting column
SIM 3D reconstruction
3. Mechanical safety, checks:
SIM Foot brake
SIM Brakes SIM Wheels
3. Mechanical safety, checks:
SIM C-arm
SIM Lifting column
n.a.
Emergency Stop switch
3. Electrical safety, check:
SIE 3D reconstruction
Page 24 of 46
CS PS 24
Siemens AG
Medical Solutions