Table of Contents
Advertisement
3.1.7
MicroSD Card Installation (Without Cover)
The SPG-M041 provides a micro SD card slot to support features that log and store
data.
Note: Only the FAT32 file system is supported.
Note: Before Installing a microSD Card, it is recommended to format the microSD card
to FAT32 to ensure proper file read/write access.
Location of MicroSD Card slot on SPG-M041:
•
1.
The microSD card has a beveled edge. When installing the SD card, please
make sure the card is aligned with the groove. If there is any resistance,
remove the card and re-align it to the slot.
2.
Insert the microSD card and press it in until a "click" is heard.
Chapter 3 – Gateway Setup and Configuration
20
Advertisement
Table of Contents
