Table of Contents
Advertisement
2.
Ensure the DIN rail is inserted behind the spring mechanism, and hook the
DIN rail securely, as shown in the illustration.
Note: To prevent damage to the DIN rail clip or the DIN rail, do not install the DIN rail
under or in front of the spring mechanism on the DIN rail clip.
Once the DIN rail is seated correctly in the DIN rail clip, press the front of the SPG-M041
to rotate the gateway down and into the release tab on the DIN rail clip. If seated
correctly, the bottom of the DIN rail should be fully inserted in the release tab.
Chapter 3 – Gateway Setup and Configuration
26
Advertisement
Table of Contents
