Table of Contents
Advertisement
3.4.1
DIN Rail Mounting
The DIN rail mount option is the quickest installation option. Additionally, it optimizes
the use of rail space.
The metal DIN rail kit is secured to the rear of the SPG-M041. The device can be
mounted onto a standard 1.37" (35mm) x 0.3" (7.5mm) sized DIN rail. The device can be
mounted vertically or horizontally. Refer to the following guidelines for further
information.
Note: A corrosion-free mounting rail is advisable.
When installing, make sure to allow for enough space to properly install the cabling.
1.
Position the rear panel of the SPG-M041 in front of the DIN rail. While
installing, please make sure DIN rail clip hooked DIN rail securely, as shown in
the illustration.
Chapter 3 – Gateway Setup and Configuration
25
Advertisement
Table of Contents
