3.2
Connecting Power Supply
Position cables with care. Do not position cables in places where they
•
may be trampled or compressed by objects placed on them.
Make sure that power-points and plugs are in good condition before
•
using them.
Do not overload the power-points or plugs.
•
Make sure the product maintains a proper grounding connection.
•
Use a power supply that meets the product requirements and complies
•
with the relevant standards and regulations.
Connect to power only after the installation of the system has been
•
completed.
Never connect or disconnect the cables with the system or the external
•
apparatus switched ON.
Location of DC Power input connector on SPG-M041:
Chapter 3 – Gateway Setup and Configuration
21