Reset console driver (new) installation:
Connect administration computer and IoT gateway console port (micro USB
•
port) with micro USB data cable
Disconnect power source from device and use a pointed object to press and
•
hold Reset button
Feed power to device and release Reset button.
•
Follow prompts on administration computer and complete the console driver
•
installation
Console driver is designed for Windows computer only
•
3.4
Installation and Mounting
This section describes the mounting procedure for the SPG-M041.
The following guidelines are provided to optimize device performance. A review of the
guidelines should be performed prior to device installation.
Ensure cabling is away from sources of electrical noise. Radios, power lines,
⚫
and fluorescent lighting fixtures can interfere with device performance
Ensure cabling is positioned away from equipment that can damage the
⚫
cables
In ethernet 10/100 fixed port devices, the cable length from the SPG-M041 to
⚫
connected devices cannot exceed 100 meters (328 feet)
Ensure airflow around the SPG-M041 (and respective vents) is unrestricted.
⚫
Without proper airflow, the SPG-M041 can overheat. To prevent performance
degradation and damage to the SPG-M041, make sure there is clearance at
the top and bottom and around the exhaust vents.
Chapter 3 – Gateway Setup and Configuration
24