Table of Contents
Advertisement
(1) Emulation probe cable connection connectors (CN5, CN6, CN7)
Connect the supplied probe cable.
(2) Main clock resonator socket (OSC1)
This socket is used to connect the main clock resonator. (For details, refer to 3.1 Clock Settings.)
(3) Subclock resonator socket (OSC2)
This socket is used to connect the subclock resonator. (For details, refer to 3.1 Clock Settings.)
(4) Main clock oscillator socket (X1)
This socket is used to connect the main clock oscillator. (For details, refer to 3.1 Clock Settings.)
(5) Pull-up resistance setting switch (SW1)
This switch is used to set emulation of the pull-up resistance, which is a mask option of the V850ES/KF1,
V850ES/KG1, and V850ES/KJ1. (For details, refer to 3.2 Pull-Up Resistor Settings.)
(6) Power-ON threshold voltage setting socket (JP4)
This socket is used to set the threshold voltage for judging whether the target system is connected. (For
details, refer to 3.3 Power-ON Threshold Voltage Settings.)
(7) Regulator output stabilization capacitance socket (JP8)
This socket is used to stabilize the output when using the regulator of the V850ES/KF1, V850ES/KG1, or
V850ES/KJ1. (For details, refer to 3.4 Regulator Output Stabilization Capacitance Setting Jumpers.)
(8) Regulator output stabilization capacitance setting jumper (JP7)
This jumper is used to set whether to use the regulator of the V850ES/KF1, V850ES/KG1, or V850ES/KJ1.
(For details, refer to 3.4 Regulator Output Stabilization Capacitance Setting Jumpers.)
CHAPTER 2 PART NAMES AND FUNCTIONS
User's Manual U16594EJ1V0UM
17
Advertisement
Table of Contents
