3.4 Regulator Output Stabilization Capacitance Setting Jumpers
These are the jumpers for connecting the capacitance for stabilizing the output when using the regulator of the
V850ES/KF1, V850ES/KG1, or V850ES/KJ1. For the location of JP7 and JP8, refer to Figure 2-1. A 10 µ F electrolytic
capacitor is mounted on JP8 at shipment.
Table 3-3. Regulator Output Stabilization Capacitance Settings
Regulator
Don't use
(setting at shipment)
Use
22
CHAPTER 3 SWITCH SETTINGS
JP7
− (don't care)
!
!
User's Manual U16594EJ1V0UM
JP8
+
Output stabilization
capacitance
2-pin jumper
1
(standard accessory)
1
JP8
To REGC pin of
emulation CPU
2
2