NEC IE-703217-G1-EM1 User Manual page 5

Target Readers
Purpose
Organization
How to Read This Manual
Conventions
Terminology
Target device This is the device to be emulated.
Target system The system (user-built system) to be debugged.
configured by the user.
Emulation CPU The CPU that executes the program created by the user in the emulator.
INTRODUCTION
This manual is intended for users who design and develop application systems
using the V850ES/KF1, V850ES/KG1, and V850ES/KJ1 microcontrollers.
The purpose of this manual is to describe the basic specifications of the IE-
703217-G1-EM1 and its proper operation.
This manual is broadly divided into the following parts.
• Outline
• Part names and functions
• Switch settings
It is assumed that the reader of this manual has general knowledge in the fields of
electrical engineering, logic circuits, and microcontrollers. Use the IE-703217-G1-EM1
connected to the in-circuit emulator (IE-V850ES-G1). This manual describes the basic
setup procedures and switch settings of the IE-703217-G1-EM1 and IE-V850ES-G1.
For the part names, functions, and configuration parts of the IE-V850ES-G1, refer to
the IE-V850ES-G1 User's Manual (U16313E) provided separately.
To learn about the basic specifications and operation
→Read this manual in the order listed in CONTENTS.
To learn software settings such as the operation methods, command functions, etc., of
the IE-V850ES-G1 or IE-703217-G1-EM1
→Read the user's manual of the debugger (sold separately) that is used.
Note:
Caution:
Remark:
Numeral representation:
Prefix representing a power of 2 (address space, memory capacity):
The meanings of terms used in this manual are listed below.
User's Manual U16594EJ1V0UM
• Setup procedure
• Cautions
• Restrictions
Footnote for item marked with Note in the text
Information requiring particular attention
Supplementary information
Binary ... ×××× or ××××B
Decimal ... ××××
Hexadecimal ... ××××H
10
K (kilo): 2 = 1024
20 2
M (mega): 2 = 1024
This includes the target program and hardware
5