GE Dash 3000 Operator's Manual page 200

Maintenance
Cadex SMart Two+ Battery Charger
Safety
A-8
As the battery ages, the full charge capacity of the battery will degrade and be
permanently lost. As a result, the amount of charge that is stored and available for
use is reduced.
NOTE
To extend the life of batteries, GE recommends using the external Cadex SMart
Two+ battery charger to perform all battery care functions.
To use the external battery charger, the monitor must be running software version 2A
or later and the charger must be running software version 1.1 or later.
The following LEDs appear on the battery charger. The combination of LEDs and
their meaning change by illumination type (solid or flashing).
LED
RUN
RUN and CONDITION
READY
READY and CONDITION
FAIL
FAIL and CONDITION
WARNING
PHYSICAL INJURY—Do NOT install the monitor above a patient.
Make sure the batteries are completely inserted and battery doors are
completely closed. Falling batteries could seriously or fatally injure
neonatal or other vulnerable patients.
WARNING
EXPLOSION OR FIRE —Using non-recommended batteries could
result is injury/burns to the patients or users. Only use batteries
recommended or manufactured by GE. The warranty can be voided
if non-recommended batteries are used.
Dash™ 3000/4000/5000
Illuminated
Charging in progress.
Conditioning in progress.
Charging is complete.
Conditioning is complete
(pass target).
Battery fault.
Conditioning is complete
(fail target).
Flashing
Initializing the battery.
Conditioning is required.
Charger fault.
2000966-386D