Compatible Devices - GE Dash 3000 Operator's Manual

Interfacing with Non-GE Devices

Compatible Devices

Anesthesia Machines
Supported Device
North American Dräger Narkomed 2B: 2.06
Narkomed Anesthesia
Narkomed 2C: 1.11 E
Machine
Narkomed 3: CO2/Agt
1.02, O2 Med, 1.04,
Oximeter 1.07,
Spiromed 1.04,
Sphymomed 2.05,
Baromed 1.06, CCC
1.01, ECC 1.04
Alarms CRT 2.02
Narkomed 4: 1.25,
Comm hub 2.01,
Narkomed GS: 1.10
Narkomed 6000: WPU
1.01
Dräger Cato Anesthesia Dräger Medibus
Machine Dräger PM8050 Version 3.0 & Device
Anesthesia Machine Version 2.02
Dräger PM8060 Dräger Medibus
Anesthesia Machine (9 Version 3.0 & Device
pin and 25 pin) Version 2.00
E-4
If the peripheral device manufacturer changes any parameters or information sent, the
connectivity device will not send any of the new parameter information over the
network.
The following is a list of devices compatible with the Unity Network ID connectivity
device. Check with the original equipment manufacturer for availability and
regulatory status of these devices in your area.
NOTE
The following peripheral devices are compatible with Dash 3000/4000 software
version 3 or later, Dash 5000 software version 6.4 or later, and Unity Network ID
connectivity device software version 5 or later.
When the connectivity device is using a software version other than v5, see the
product manuals provided with your Unity Network ID connectivity device for a
list of supported devices.
Supported Anesthesia Machines
Supported Device
Waveform
Software Version(s)
VNT Flow,
VNT Pres,
CO
2
VNT Flow,
VNT Pres
VNT Pres,
CO
2
VNT Pres,
CO
2
Dash™ 3000/4000/5000
Parameter Alarms
All
versions:
Exp VNT
3, 4: VNT,
CO , GAS
2
VNT
-- VNT, GAS,
CO
2
VNT, GAS,
Exp CO
2
VNT, GAS,
Exp CO
2
Part Number for
Interface
Adapter
Yes 420915-016
Yes 420915-016
Yes 420915-016
Yes 420915-021
Yes 420915-036 (25
pin)
420915-051(9
pin)
Part Number for
Interface
Installation
Instructions
418265-016
418265-016
418265-016
418265-021
418265-036 (25
pin)
418265-051 (9
pin)
2000966-386D