GE Dash 3000 Operator's Manual page 242

Interfacing with Non-GE Devices
Supported Device
Software Version(s)
Abbott Q-Vue and Q-Vue CCO
computer:
Q2 Monitors
version 1.08,
application
version 1.08, and
BIOS
version 1.03
Q2 computer: version
3.00, application
version
3.00, and BIOS
version
1.07
Pulsion Medical PiCCO: 4.1.2, 4.2,
PiCCO plus: 5.1,5.2,
Systems Monitors
5.2.2, 6.0, 6.1
Baxter Edwards Critical- 00.67
Care Vigilance II Monitor
Baxter Edwards Critical- 1.07
Care Vigileo Monitor
Gas Analyzers
Supported Device
Software Version(s)
Datex Capnomac Ultima 882916-2.0, 882916-
Gas Analyzer 3.1
Ohmeda Rascal II 1.11 & 1.23
Anesthetic Gas Monitor
Ohmeda 5250 RGM Display: 5.1 & 6.0
(Respiratory Gas
Signal: 5.007 & 6.007
Monitor)
ACX: 1.2
Nellcor Puritan Bennett N-1000 Display:
N-1000 Multi-Function 2.03.03 (or 2.3)
Monitor and N-2500
N-2500: 01.02.03 (or
Anesthesia Safety
1.2)
Monitors
E-6
Supported Continuous Cardiac Output Monitors
Supported Device
Waveform
—
—
—
—
—
Supported Gas Analyzers
Supported Device
Waveform
—
—
—
—
Dash™ 3000/4000/5000
Parameter Alarms
CCO Status
messages
only
CCO, Status
SVO messages
2
only
CCO Status
messages
CCO, Yes
SVO
2
CCO, Yes
SVO
2
Parameter Alarms
GAS, CO Yes
2
GAS, CO No
2
GAS, CO Yes
2
GAS, CO , Yes
2
SPO
2
Part Number for
Part Number for Interface
Interface Adapter Installation
Instructions
420915-025 418265-025
420915-080 418625-080
420915-052 418265-052
420915-052 418265-052
Part Number for
Part Number for Interface
Interface Adapter Installation
Instructions
420915-004 418265-004
420915-014 418265-014
420915-015 418265-015
420915-034 418265-034
2000966-386D