Mitsubishi Electric MELSEC iQ-R Series User Manual page 119

A
(0) The transmit data default value is set.
'I/O communication request' (Y31) is turned on.
(24) The slave function data consistency dedicated instruction setting status is read.
(29) (142) The receive data is read from the slave function receive data area.
(147) The receive data is stored.
(162) The transmit data is created.
(182) The created transmit data is stored in the write data area.
(204) The transmit data is written to the slave function transmit data area.
APPX
117
Appendix 5 Setting the Parameter with a Program