Maintenance; Cleaning And Care - LG FA415RMA Owner's Manual

MAINTENANCE

Cleaning and care

Switching on the oven lighting
To make it easier to clean the oven, you can switch
on the oven lighting.
To switch on the lighting, press the function button for
oven lighting until it locks into place.
Using the correct cleaning agent
Do not use cleaning agents that contain abrasive substances or acids, or cleaning aids such as steel wool or
stainless steel sponges. These could damage the surfaces.
Appliance parts
Appliance door glass
panel
Control panel and knobs
Seal (on the cooking
compartment)
Hook-in racks
Cooking compartment
Enamelled surfaces
Gas burners
Burners
Gas burners
Oven and grill
Appliance exterior
Stainless steel surfaces
Glass cover
(in front of the oven lighting)
Pan support
Accessory
Cleaning agent and cleaning aid
• Use glass cleaner.
• The lower edge of the door may have sharp edges.
• Clean the door and glass panels with care.
• Do not use a glass scraper.
• Wipe with a damp, soft cloth.
• Use warm soapy water.
• Use warm soapy water.
• Use warm soapy water; Dry off with a soft cloth.
• Remove the burner cups and lids; use soapy water; allow to dry well.
• Clean the ignition plugs and thermocouple with a damp cloth or a small, soft
brush; allow to dry well.
• When refitting: Place the burner cup onto the burner.
Position the burner lid exactly on the burner cup.
• The burner lids are coated with black enamel. Over time they will change colour.
This does not affect the function.
• Never clean the gas burners in the cooking compartment yourself.
• Use warm soapy water; Dry off with a soft cloth.
• Always remove flecks of limescale, grease, starch and albumin (e.g. egg
white) immediately.
• Special stainless steel cleaners are available from the after-sales service or
specialist shops.
• Use warm soapy water.
• Use warm soapy water
• Do not clean the pan supports in the dishwasher.
• Soak in hot soapy water. Clean with a brush or sponge.
• Rotary spit: Special stainless steel cleaners are available from the after-sales
service or specialist shops.
CAUTION
• NEVER USE HIGH-PRESSURE
CLEANERS OR STEAM JETS.
• NEVER USE CAUSTIC OR
ABRASIVE CLEANING AGENTS.
• IF SUCH AN AGENT GETS
ON THE FRONT OF THE
APPLIANCE, WIPE OFF
IMMEDIATELY WITH WATER.
• DO NOT CLEAN ANY
SURFACES OF THE APPLIANCE
WHILE THEY ARE HOT.
MAINTENANCE 31