Figure 1-1 Reference Of Hardware (Maa) To Applicable Sections Of This Manual; Figure 1-2 Reference Of Hardware (Mmo) To Applicable Sections Of This Manual - Siemens Maxum II Manual

General Information for the User
Detector Enclosure (Including
Detectors and Methanator)
Sections 4.2, 4.4, 4.5
Figure 1-1
Automatic Purge Unit (APU)
or Pressure Relief Valve
(Inside Enclosure)
Sections 2.2, 2.3
Signal Disconnect
Relay for APU
Section 2.3
Proportinal Valve for
APU (Section 2.3)
Oven Enclosure
for Modular Oven
Sections 3.6 to 3.7
Figure 1-2
8
Automatic Purge Unit (APU)
or Pressure Relief Valve
(Inside Enclosure)
Sections 2.2, 2.3
Signal Disconnect
Relay for APU
Section 2.3
Touch Screen or
Maintenance Panel
Section 5.1
Air Treater
Section 4.3
Reference of Hardware (MAA) to Applicable Sections of this Manual
CIM Display
Section 5.1
Reference of Hardware (MMO) to Applicable Sections of this Manual
Exhaust Di user
Sections 2.2, 2.3
Oven Enclosure
(Air Bath Oven Shown)
Sections 3.1 to 3.5
Exhaust Diffuser
Section 2.2, 2.3
MAXUM
edition II
Electronics
Enclosure (Purged)
Sections 2.2, 2.3
Proportinal Valve for
APU (Section 2.3) or
Purge Control Module
(Section 2.2)
Purge Air Inlet &
Regulator
Sections 2.2, 2.3
Heated Valve
Section 4.1
Electronics
Enclosure (Purged)
Sections 2.2, 2.3
Purge Control Module
(Section 2.2)
Intrinsically Safe
Detector Personality
Module (DPM)
Section 4.2
Explosion Protection Safety Standards
Manual, August 2017, A5E02220442001 Rev 8