Table 1 1 Description of SAS port LEDs
Callout
1
2
Interconnect Port LEDs
The controller node has two interconnect ports. Each interconnect port includes two LEDs.
Figure 21 Location Interconnect Port LEDs
Table 12 Description of Interconnect Port LEDs
Callout
1
2
Fibre Channel Adapter Port LEDs
The Fibre Channel adapter in the controller node includes Fibre Channel port LEDs:
24
Understanding LED Indicator Status
LED
Appearance
DP- 1
Green
DP-2
Green
LED
Appearance
Status
Green
Fault
Amber
Indicates
Off– SAS link is present or not, this LED does not remain lit
Flashing–Activity on port
Off–SAS link is present or not, this LED does not remain lit
Flashing–Activity on port
Indicates
On – Link established
Off – Link not yet established
On – Failed to establish link connection
Off – No errors currently on link
Flashing – Cluster link cabling error, controller node in wrong slot,
or serial number mismatch between controller nodes.