Cage; Format Of Possible Cage Exception Messages; Cage Example 1; Cage Suggested Action 1 - HP 3PAR StoreServ 7000 Troubleshooting Manual

Hide thumbs Also See for 3PAR StoreServ 7000:
Table of Contents

Advertisement

cage

Displays drive cage conditions that are not optimal and reports exceptions if any of the following
do not have normal states:
Ports
SFP signal levels (RX power low and TX failure)
Power supplies
Cage firmware (is not current)
Reports if a servicecage operation has been started and has not ended.
Cages are supported for hardware platform

Format of Possible cage Exception Messages

Cage cage:<cageid> "Missing A loop" (or "Missing B loop")
Cage cage:<cageid>,mag:<magpos> "Magazine is <MAGSTATE>"
Cage cage:<cageid> "Power supply <X>'s fan is <FANSTATE>"
Cage cage:<cageid> "Power supply <X> is <PSSTATE>" (Degraded, Failed, Not_Present)
Cage cage:<cageid> "Power supply <X>'s AC state is <PSSTATE>"
Cage cage:<cageid> "Cage is in "servicing" mode (Hot-Plug LED may be illuminated)"
Cage cage:<cageid> "Firmware is not current"
Cage cage:<cageid> "Cage type <Model> is not supported on this platform"
Cage cage:<cageid> "Missing both A and B loops"
Cage cage:<cageid> "Cage state information is unavailable"

cage Example 1

Component -Summary Description- Qty
Cage
Cages missing A loop
Component -Identifier- -Detailed Description--
Cage
cage:1

cage Suggested Action 1

Check the connection/path to the SFP in the cage and the level of signal the SFP is receiving. An
RX Power reading below 100 µW signals the RX Power Low condition; typical readings are between
300 and 400 µW. Helpful CLI commands are showcage -d and showcage -sfp ddm.
At least two connections are expected for drive cages, and this exception is flagged if that is not
the case.
cli% showcage -d cage1
Id Name
LoopA Pos.A LoopB Pos.B Drives Temp
1 cage1 1:0:1
-----------Cage detail info for cage1 ---------
Position: ---
Interface Board Info Card0
Firmware_status
Product_Rev
State(self,partner)
VendorId,ProductId
Master_CPU
SAS_Addr
Link_Speed(DP1,DP2)
PS PSState ACState DCState Fan State Fan0_Speed Fan1_Speed
1
Missing A loop
1 0:0:1
1
8 21-23 402e 402e DCS2
Card1
Current
Current
402e
402e
OK,OK
OK,OK
HP,DCS2
HP,DCS2
Yes
No
50050CC1178EA0BE 50050CC1178E6BBE
6.0Gbps,Unknown
6.0Gbps,Unknown
RevA RevB Model FormFactor
SFF
Troubleshooting Storage System Components
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

3par storeserv 7000c

Table of Contents