NEC Aspire Manual page 146

Section 3: Features
Program
No.
15-01 Extension Basic Data Setup (include Virtual Extension)
15-02 Multi-Line Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-04 PHS Terminal Basic Data Setup
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
15-10 Incoming Virtual Extension Ring Tone Order Setup
15-11 Virtual Extension Delayed Ring Assignment
15-12 Conversation Recording Destination for Extension
20-06 Class of Service for Extension
21-02 Trunk Group Routing for Extensions
21-04 Toll Restriction Class for Extensions
21-11 Hotline Assignment
23-02 Call Pickup Group
23-03 Ringing Line Preference
23-04 Ringing Line Preference for Virtual Extensions
24-03 Park Group Assignment
31-02 Internal Paging Group Assignment
32-02 Door Box Ring Assignment
138
●
Using this option will also swap the order in which these extensions are displayed in all exten-
sion-related programs . This means that the system will no longer display all the extension
numbers from low to high. For example, if port 2 and 6 were swapped, when viewing the
extensions in 15-02-01, the extensions will display in the following order: 301, 306, 303, 304,
305, 302.
Extension Data Copy Function Enhanced to Provide Port Copy Option
Depending on your software, the system provides the ability to copy an extension's programming
to another extension either by extension number or port number, depending on which program you
use. With older software, an extension's information could only be copied based on the extension
number.
The following extension-based programs can be copied:
Program Name
Keep the following items in mind when using the Extension Data Copy function:
●
Using this program to copy a keyset's Programmable Function Keys will copy all the keys
whether they exist on the phone to which the programming is being copied. This may cause
confusion when trying to deÞne a key which is already deÞned but which doesn't exist on the
phone (will display as "DUPLICATE DATA"). It is recommend to either clear these non-exis-
tent keys or to only copy from an extension which has the same or fewer number of keys than
the extension to which the programming is being copied.
Note
Copy all data except extension name
(item 01).
Copy Item 11, 12 and 13.
Requires software 2.67+.
Requires software 4.93+.
Product Description