Keyset Adapters - NEC Aspire Manual

Keyset Adapters

Each Aspire keyset (except the 2-Button telephone) accepts the following optional adapters, though
there are limitations with phone types (such as IP) and adapter compatibility. Each telephone can
have up to two adapters installed except when an IP adapter is used. This adapter uses the full space
on the keyset, preventing any other adapter installation. In addition, the IP adapter cannot be used
on a Super Display telephone.
You can install one of these. . .
● Call Recording Adapter (ADA) (P/N 0890055)
Using the ADA Adapter provides a recording jack connection which provides a connection from a
telephone to an external tape recorder or speaker.
● Analog Interface with Ringing (APR) (P/N 0890056)
The APR provides an analog interface for a keyset. The APR provides ringing which allows the
connected device to be used for incoming and outgoing calls. It can use the same extension number
as the keyset (B1 channel) or it can have its own extension number (B2 channel). The APR does not
support reverse polarity, message waiting lamping, or Caller ID.
● Analog Interface without Ringing (APA) (P/N 0890057)
The APA provides an analog interface for a keyset. The connected device is used for outgoing calls
only (for example, when using a modem). It does not provide ringing. When an analog device is in
use, the keyset cannot be used (as the same port number is used for both devices). If both devices
are picked up at the same time, the analog device takes priority. The APA does not support reverse
polarity, message waiting lamping, or Caller ID.
● RS-232C Adapter (CTA) (P/N 0890058)
Provides a serial interface (RS-232C) connector. This can be used for SMDR or TAPI (1.4) or sys-
tem reporting.
● Speakerphone Adapter (HF-R) (P/N 0890062 & 0890063)
Offers 22-Button, 34-Button, and Super Display keysets high quality speakerphone capability.
● USB Adapter (CTU) (P/N 0890059)
Provides a USB connector. This can be used for either SMDR, TAPI (1.4) or system reporting.
● 24-Button DLS Console (P/N 0890053 & 0890054)
Refer to the "110-Button DSS Console and 24-Button DLS Console" on 24-Button DLS Console
— P/Ns 0890053 & 0890054 (page 12) for more details.
Product Description
This adapter requires an AC Adapter (AC-2R), P/N 780135.
The APR for the B1 channel consumes no ports, however, the B2 channel consumes 1
port, ranging from 512 to 1 in descending order.
This adapter requires an AC Adapter (AC-2R), P/N 780135.
This adapter requires an AC Adapter (AC-2R), P/N 780135.
Section 2: Components
2
9