Tandem Ringing - NEC Aspire Manual

Section 3: Features

Tandem Ringing

• Available.
Description
172
ANI/DNIS Compatibility
The system is compatible with telco's T1 Automatic Number IdentiÞcation (ANI) and Dialed
Number Information Service (DNIS) services. This is only for T1 - not for PRI at this time). A
compliment to Caller ID service, ANI/DNIS Compatibility provides:
●
Selectable Receive Format
You can set up the system for compatibility with any combination of ANI, DNIS and Dialed
Number (Address) data provided by the telco.
●
Flexible Routing
Based on the data received, the system can route the incoming ANI/DNIS call to:
- An extension
- An ACD or Voice Mail master extension number
- The VRS and play a VRS message to the caller.
- A Department Group pilot number
- A trunk Ring Group
●
Route According to DID Translation Table or Abbreviated Dial Bins
Calls can be routed based on either the number of digits deÞned in Program 22-09-01 (digits
1-8) or by digits entered in Abbreviated Dial bins in Program 13-04-01.
● ANI/DNIS Data Displayed as Caller ID Data
● Data Error and Unanswered Call Handling
If a call can't be completed, send it to a predetermined Ring Group or play supervisory tones
to the caller.
Aspire S
Tandem Ringing allows an extension user to have two telephones with one phone number. For
example, extension 305 (the master phone) sets Tandem Ringing with extension 306. When exten-
sion 305 receives an incoming call, both extension 305 and 306 ring. Callers would dial the master
extension number (extension 305 in this example). When either the master phone or slave phone is
in use, the other phone cannot be used for outgoing calls - incoming calls, however, will ring the
available phone.
The keyset must be paired with either an analog single line telephone or Aspire Wireless extension.
It cannot be paired with another keyset or IP phone.
Aspire M/L/XL
• Available.
Product Description