Fan Mode
User can use the device simply as an air circulator.
Air Circulation Mode
1
Press the Mode Selector button so that the display indicates
(Fan) .
Press the
(Fan Speed) button.
2
(Silent)
(Super High)
Press the
(On/Off) button. Fan operation starts with a beep.
START
Press the button again to stop operation.
STOP
Press the
(Mode Selector) button so that the display indicates
1
(Air Circulation).
2
Press
(Fan Speed) button and select the desired fan speed
(the display indicates your choice).
3
Press the temperature control button to set to the desired temperature.
The temperature can be set from 16°C ~ 32°C.
START
Press the
(On/Off) button to stop operation.
STOP
■ During circulation operation, compressor will not be running and there is
no cooling operation with only indoor fan running.
■ When the setting temperature is higher than room temperature, indoor fan
will stop running.
– 5 –
(Low)
(Medium)
(High)