Operation Mode (Cool, Heat, Dry, Cool/Heat Auto And Fan Operation); Temperature Setting - Hitachi airPoint Room 700 Operation Manual

3. Operation Method

3.2 Operation Mode (Cool, Heat, Dry, Cool/Heat Auto and Fan Operation)

Heat mode is only available when the indoor unit supports cooling and heating. Cooling only machine
cannot support heating.
1. Operation mode setting
Step1. Press " " or " " to select "Mode".
Step2. Set the operation mode with " " or " ". The operation mode is switched in the following order:
"Cool" ↔ "Heat" ↔ "Dry" ↔ "Auto" ↔ "Fan"
If dual setpoint is selected in auto mode, both cooling setpoint and heating setpoint can be
selected.
By default, temperature is as follows when cool/heat mode changes:
•
Temperature switch from cool mode to heat mode:
Room temperature = Heating set temperature -2°F （ -1°C ）
•
Temperature switch from heat mode to cool mode:
Room temperature = Cooling set temperature +2°F ( +1°C )
A/C
Main
26.0 20.0
Temp
NOTES:
•
The function selection setting is required for "Auto" operation. Please contact your distributor for details.
•
"Dry" mode may not be available depending on the type of indoor unit.

3.3 Temperature Setting

1. Temperature setting
Step1. Press " " or " " to select "Temp".
Step2. By pressing " ", the temperature is increased by 1°F ( 0.5
By pressing " ", the temperature is decreased by 1°F ( 0.5
• Cool, Dry, Fan operation: A minimum of 66°F (19
• Heat operation: A minimum of 62°F (17
NOTES:
•
Depending on the type and setting of the indoor unit, it may not be possible to set the temperature by 0.5
•
The max./ min. temperature may differ depending on the type of indoor unit.
•
Minimum and maximum temperature can be set by selecting a heating upper limit (or cooling upper limit)
and heating lower limit (or cooling lower limit) in the "Function Selection" mode. Minimum and maximum
temperature can also be changed through "Temperature Range Restriction" setting in Service Menu.
•
When the "Automatic Reset of Setting Temperature" function is selected, the temperature is automatically
returned to the preset temperature after the temperature set-point change.
•
Contact your distributor for detailed information about "Automatic Reset of Setting Temperature" and
"Temperature Range Restriction" functions.
6
Conference Room
26
C
.0 20
C
.0
COOL HEAT
A A
Auto Fan Speed Louver Menu
.
A/C
Main
26.0
A/C
Main
26
o
C ) to a maximum of 86°F ( 30
o
C).
o o
C) , 68°F (20 C) in United Arab Emirates (UAE).
o
C)
Mode
Cool
A A
Temp Cool Fan Speed Louver
Conference Room
20
C
26 .0
C
.0
COOL HEAT
A A
20.0
Temp Auto Fan Speed Louver
26
. 0
.
0
Fan Speed Louver
Temp Cool
o
C).
A16381TMEU
Menu
Menu
Menu
o
C.