Hitachi airPoint Room 700 Operation Manual page 13

No.
30 Main
31 Sub
32 Sub
33 Quick
34 Other remote are in ** setting
Emergency Heating →
35
Alarm Code: **
Auto Clean Unit
36 Mechanic error
Check the unit
37 Cleaning Filter
38 Check
39 Preheating
40 HOT-START
41 Defrost
42 Heat Storage
43 Dust collection **-**
44 Central control
45 Time to OFF(hour)
46 Priority
47 Restrict
(*1) : It depends on the settings of the remote controller.
(*2) : The default setting is cooling: set temperature +4°F (+2.5°C), heating: set temperature -4°F
If you want to change the correction value for this setback operation, please contact the distributor for
more detailed information.
A16381TMEU
Icon
This is the main remote controller setting.
Use the main remote controller to set the main power savings setting.
In the case of a single unit, the main does not light up.
Sub remote controller is set. Except for some power savings functions, the sub
remote controller cannot be set to save power.
There is no main remote controller.
Controls related to power savings and operation noise reduction may not
operate normally.
The operation is in quick mode.
When the operation mode set from the remote controller and the operation
mode of the outdoor unit is different, the indicator blinks.
When "Cool" is set from the remote controller and when the operation mode of
the outdoor unit is "Heat".
Emergency Heating Control is in progress.
** indicates the alarm code.
Indicates an error related to the automatic filter cleaning unit.
The filter is being automatically cleaned.
Indicates an abnormality in the heat storage unit.
The compressor cannot be operated because it is preheating.
Preparing for heating operation.
During the defrosting operation, the defrosting light turns on and the indoor fan
stops.
When the operation is stopped during the defrosting operation, the operation
light or the run indicator goes out, but the operation continues and stops after
the defrosting is completed.
It cannot be operated due to the heat storage operation time.
It is time to collect dust in the dust box of the automatic filter cleaning unit.
**-** indicates the unit to be collected.
Displayed when using the central controller. Remote controller operation is
restricted.
The remaining time of the off timer when the hotel mode is displayed.
Displayed on the main remote controller only in the operation mode or when
there is a setting priority for the operation mode and the set temperature.
At this time, the operation limit lights up on the sub remote controller, and the
operation mode and temperature setting change on the sub remote controller
are restricted.
Displayed on the sub remote controller only when the operation mode or the
operation mode and set temperature setting priority is given.
Description
Conference Room
26
Cool
Other remote are in Heat setting
26
.
5
Temp Cool
Indicator blinks
3. Operation Method
. 5
Indv.
Fan Speed Louver Menu
-2.5°C).
(
11