Setback Setting - Hitachi airPoint Room 700 Operation Manual

5. Function Menu Screen Display

5.9 Setback Setting

1. Setback schedule setting
This function is used to start/stop setback mode at desired time. It is available only when setback mode is
set as Schedule mode.
To change the setback mode, select another mode at the function selection setting. Contact your distributor
for detailed information. The items cannot be set/modified if indoor unit does not support this function.
Step1. Select "Setback Setting" on the "Function Menu" screen
and press "OK".
If the current time is not set, the "Adjusting Date/Time"
setting screen is displayed.
Step2. Press " " or " " to select the settings, and the selected item
changes as follows:
"ON Time" ↔ "OFF Time" ↔ "
Step3. Press " " or " " to select the setting. After setting, press
" " to confirm the settings and then the screen returns to
the "Function Menu" screen.
•
When ON Time / OFF Time is selected,
The time changes every 30 minutes.
•
Do not set the same time for ON Time and OFF Time.
It's unavailable if ON time or OFF time is not set.
•
When "
the confirmation screen is displayed.
Select "Yes" and press "OK" to delete the settings and
the screen returns to Step2.
If select "Cancel", the screen returns to the "Setback
Setting" screen.
NOTES:
•
In the following instances, the schedule operation is NOT available.
○ When the operation is prohibited by the controller and is set from the central controller.
○ If the icon "
yet. To specify the Date/Time setting, refer to "6.1 Adjusting Date/Time" for details.
30
" is selected,
" is displayed, the schedule control is NOT activated because the Date/Time is not specified
".
Function Menu
Power Consumption Display
Autoboost
Comfort Setting
Motion Sensor Setting
Setback Setting
Select
OK
Setback Setting
ON Time OFF Time
22 : 00
16 : 00
Setback Setting
Reset Setback Setting ?
OFF Time
ON Time
AM 06 : 00 PM02 : 00
Yes Cancel
OK Select
A16381TMEU
(Mon) 16:30
Back
(Mon) 16:30
Back
(Mon) 16:30
Back