Setback Setting - Hitachi airPoint Room700 Operation Manual

5. Function Menu Screen Display

5.9 Setback Setting

Setback function is designed to maintain a minimum level of comfort in a room when it is not occupied.
Setback function is enabled or disabled at the function selection setting. The setback setting is available only
when the setback mode is set as "Schedule" or "Manual" at function selection setting. Please contact your
service agent for further information or assistance with these.
The items cannot be set/modified if indoor unit does not support this function.
1. Setback schedule setting
This function is used to start/stop setback mode at desired time. It is available only when setback mode is set
as Schedule mode.
Step1. Select "Setback Setting" on the "Function Menu" screen
and press "OK".
If the current time is not set, the "Adjusting Date/Time"
setting screen is displayed.
Step2. Press " " or " " to select the settings, and the selected item
changes as follows:
"ON Time" ↔ "OFF Time" ↔ "
Step3. Press " " or " " to set the ON and OFF times. After setting,
press " " to confirm the settings and then the screen
returns to the "Function Menu" screen.
•
The ON and OFF time can be set in 30 minute
increments.
•
Do not set the same time for ON Time and OFF Time.
It's unavailable if ON time or OFF time is not set.
•
When "
the confirmation screen is displayed.
Select "Yes" and press "OK" to delete the settings and
the screen returns to Step2.
If select "Cancel", the screen returns to the "Setback
Setting" screen.
NOTES:
•
In the following instances, the schedule operation is NOT available.
○ When the operation is prohibited by the controller and is set from the central controller.
○ If the icon "
yet. To specify the Date/Time setting, refer to "6.1 Adjusting Date/Time" for details.
30
" is selected,
" is displayed, the schedule control is NOT activated because the Date/Time is not specified
".
Function Menu
Power Consumption Display
Autoboost
Comfort Setting
Motion Sensor Setting
Setback Setting
OK Select
Setback Setting
OFF Time
ON Time
22 : 00
16 : 00
Setback Setting
Reset Setback Setting ?
ON Time OFF Time
PM02 : 00
AM 06 : 00
Yes Cancel
Select
OK
A16381H9HL
(Mon) 16:30
Back
(Mon) 16:30
Back
(Mon) 16:30
Back