Zone Operation Setting; Zone Set Temperature Setting - Hitachi airPoint Room700 Operation Manual

10.2 Zone Operation Setting

This function is to set operation (ON/OFF) of individual zone.
Step1. Press " " or " " to select "ON/OFF".
Step2. Press " " or " " to set zone operation.
NOTES:
•
When "Spill zone control on" displays in the bottom left corner, spill zone enters automatic control, and the
actual state of the zone may not be consistent with the set state.
•
During Setback operation, Zoning Kit does not accept zone settings.
Even if the parameters are modified, they will be restored after one second.

10.3 Zone Set Temperature Setting

This function is to adjust "set temperature" of individual zone.
Step1. Press " " or " " to select "Temp".
Step2. By pressing " ", the temperature is increased by 0.5°C or 1°C.
By pressing " ", the temperature is decreased by 0.5°C or 1°C.
NOTE:
•
The set temperature of the zone can be set to ±3°C of zone base temperature(within the range of upper and
lower limit of the set temperature).
A16381H9HL
10. Premium Zoning Kit Function
Living
Zone 1 (Spill Zone)
2P.5 26.P
ON
26
C
.5
On5O77 Temp
Spill zone control on
ON
OÃÂOÄÄ
Zone base temperature
Living
Zone 1 (Spill Zone)
2P.5 26.P
ON
26
C
.5
On5O77 Temp
Spill zone control on
Zone average room Zone set temperature
temperature
LoR
Back
OFF
OÃÂOFF
LoR
Back
55