8. Operation Lock/Unlock Setting
•
This function disables the setting mode of the remote controller.
•
In the operation lock, when the lock icon " " lights up, the mode cannot be changed by pressing " ", " ",
"
" or "
".
•
The following four types of setting modes can be locked.
○ Temperature Setting (Temp)
○ Operation Mode (Mode)
○ Fan Speed
○ Louver Swing (Louver)
NOTES:
•
Don't use the operation lock function when remote control is set to "prohibit" on the central controller.
•
If both the "prohibit lock" and "prohibit remote control" operations are set at the same time, the "prohibit
remote control" operation has priority.
•
If the setting is changed from "prohibit remote control operations" to "permit all remote control operations",
all operation locks are released.
1. Set Operation Lock
Step1. Press "
", "
lock is in valid.
2. Set Operation Unlock
Step1. Press "
", "
unlock is in valid.
"and " "simultaneously for 3 seconds, the lock icon " " lights up and the operation
"and " "simultaneously for 3 seconds, the lock icon " " goes out and the operation
8. Operation Lock/Unlock Setting
40