Main Remote Setting - Hitachi CIS02-H Installation & Maintenance Manual

NOTES:
•
Change the optional setting after waiting at least three minutes elapsed time after start-up.
•
Do not set the elevating grille for the total heat exchanger.
•
Record the setting conditions for each input and output in the "Setting" column of the table.

7. Main Remote Setting

To change the sub remote controller to the main remote controller.
If multiple remote control group exist in the same outdoor system, main/sub setting is automatically allocated.
Set the desired Wired Remote Controller as the "Main" remote controller.
•
Example of a refrigeration system containing a group of multiple controllers
Main Controller
Sub Controller
The indoor and outdoor units need to correspond with the
functions shown in Table E.
Sub
Main
— Only One Controller in Same Refrigerant System
— Controller in addition to the Main Controller in the same Refrigerant System
H-LINK Transmission Cable
Transmission
Cable
Sub
7. Main Remote Setting
38