Table of Contents
Advertisement
5. Function Selection
5. Function Selection
Step1. Press "
"for 3 seconds to display the function selection setting
screen.
•
If only one indoor unit is connected with the wired remote
controller, Step3 is displayed.
•
If multiple indoor units are connected with the wired
remote controller, step2 is displayed.
Step2. Indoor unit selecting screen is displayed.
•
Each indoor unit has its own index number. And the
corresponding refrigerant system number and address
number are displayed on the upper right corner of the screen.
Press " "or " "to select the indoor unit by changing the "Index
No". Then press "
•
If all the indoor units are selected, the Index No. is indicated
as FF.
13
" to confirm the selection.
Indoor Unit No. (refrigerant system)
Address No.
of the
selected unit
Index No.
Index No.
Advertisement
Table of Contents
