Hitachi airPoint Room 700 Operation Manual page 37

Advanced color wired remote controller
Hide thumbs Also See for airPoint Room 700:
Table of Contents

Advertisement

FrostWash Intervals (Page 36 )
You can set the total operating time of the indoor unit as below.
Function 1
Function 2
NOTES:
The icon
Manual FrostWash may not be performed when in continuous fan mode with the icon
After operating "cooling", "heating", and "dry" mode, Manual FrostWash can be performed.
Set Auto-FrostWash Schedule(Page 37 )
When the indoor unit is OFF or stopped operation after a certain period of time, FrostWash is automatically
performed in the available time slot.
Auto-Frost Wash Schedule
Available Time Slot
1
22 : 00
~
23 : 00
2
-- : --
-- : --
~
3
-- : --
~
-- : --
4
-- : --
~
-- : --
5
-- : --
~
-- : --
Press Up and Down to adjust
Set the schedule for Auto-FrostWash as the following.
○ "Available time slot": Up to five time slots can be set.
○ "Weekday": "Monday to Sunday" and "Everyday" can be selected.
FrostWash Operation History (Page 39 )
This function is used to check and delete the FrostWash record.
5.12.3 Set FrostWash
NOTE:
In the case of 2 remote controllers, FrostWash can be set only on the primary wired remote controller.
1. Set FrostWash
Step1. Select "FrostWash Setting" in Function Menu, and press
"OK".
Step2. Press "OK".
A16381TMEU
When the total operating time reaches the set value, FrostWash is performed while
Auto-FrostWash
the operation is stopped.
When Auto-FrostWash is disabled, the total operating time reaches the set value, the
Manual FrostWash
icon
FrostWash.
disappears when performing Manual FrostWash or you enable the Auto-FrostWash.
Mon PM05:34
Weekday
Sunday
Back
5. Function Menu Screen Display
is displayed on the operation screen, so use it as a guide for manual
Condition ①
from 22:00 to 23:00 on Sunday.
Condition ②
The total operation time of the indoor unit has reached the
FrostWash interval (The default time is 100 hours).
Condition ③
When the indoor unit is OFF or stopped operation.
.
Function Menu
Elevating Grille
Reset Filter Sign Time
Filter Cleaning
FrostWash Setting
Individual Louver Setting
Select
OK
During FrostWash, a freezing sound and fog may
occur. This is a normal occurrence.
OK
(Mon) 16:30
Back
Back
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc-arfg2-aPc-arfg2-mPc-arfg2-u

Table of Contents