3)
Procedure
3-1) Insert a formatted floppy disk (1.44 MB) in the floppy disk drive of the control PC.
•
Make sure the write protect of the floppy disk is unlocked at this time.
3-2) Start up the CXDI system. If you have changed the parameters including the exposure
mode button, back up all "ini.files" to a floppy disk when you restart the system again.
•
When you first back up the files, the back up operation may take some time
because there are many files to be copied.
3-3) Make sure that all files have been copied and switch off the CXDI system.
The files copied to a floppy disk are the "C:\ccrbup", and they are the latest
backup data. If the data stored in the drive D is damaged and there is no trouble
in the drive C, restore the CXDI setting data using the data in "C:\ccrbup".
4)
FD-Back Up Off
If FD-Back Up is not necessary, open the "Service tool" window, select "FD-Back Up Off"
and press "Start".
System > Set Up menu > Administrator Setup> Service Tool.
2
.
I
n
s
t
a
l
l
a
t
i
o
n
2
.
I
n
s
t
a
l
l
a
t
i
o
n
- 103 -