8) The display returns to the "DENSITY ADJUSTMENT CONTROL" screen. Confirm
that POSITION and SIZE fields not set in step 5) to step 7) are disabled (dimmed).
If they are not dimmed, press the [Area setting] key, and press [DISABLE] in fixed
ROI * settings.
9) After Confirming all settings, and press [EXIT].
10) The display returns to the system settings screen. Press [OK].
11) "Change settings?" appears. Press [OK]. Be careful, because if [CANCEL] is
pressed, all changes made to the settings are deleted.
12) Return to the normal imaging screen, and turn off the power to the CXDI.
2. Installation
- 50 -