ABB BullsEye 7 User Manual page 15

Connecting BullsEye, 501 527-880, new sensor with four cables (2004-02).
The brown cable wire is connected to 24V DC, terminal 4 on the terminal
1
block in TC 96 and 1 in Binzel BRS-LC.
The blue wire is connected to 0V, terminal 8 on the terminal block in TC 96
2
and 3 in Binzel BRS-LC.
The white wire to the sensor input, connection 16 on the terminal block in
3
TC 96 and 10 in Binzel BRS-LC.
When the BullsEye® is correctly wired, the sensor light and input on the I/O in the
robot control cabinet should be illuminated only when the light beam of the
BullsEye® is broken.
505 942-102
BullsEye® 7
BullsEye® Installation
15