Table of Contents
Advertisement
3.4.1 Pipes and pipe connections
3.4.2 Branches and bends
A6V11783979_en--_a
Pipe
Pipe connection
90° bend
T-piece
System description
Pipe system components
●
Piping for air aspiration
●
Outer diameter: 25 mm (1 inch)
●
Inner diameter: 21 mm
●
Pipes can be trimmed to the required length
using a pipe cutter
●
Pipes can be connected using glued pipe
connections
●
Material: Typically PVC or ABS depending on
the ambient conditions
●
For connecting two pipes with an outer
diameter of 25 mm (1 inch)
●
The pipes are glued to the pipe connection
●
Material: Typically PVC or ABS depending on
the ambient conditions
●
For changes of direction in the pipe system
●
90° bend angle
●
Flange for holding the pipe at both ends
●
The pipes are glued to the bend
●
Recommendation: Use a bend with the largest
possible radius, e.g., 70 mm
●
Material: Typically PVC or ABS depending on
the ambient conditions
●
For branches in the pipe system
●
Flange for holding the pipe at all three ends
●
The pipes are glued to the T-piece
●
Material: Typically PVC or ABS depending on
the ambient conditions
3
23 | 48
Hide quick links:
Advertisement
Table of Contents
