End Caps; Label For Aspirating Holes; Fastenings; Tools - Siemens FDA2 Series Planning, Mounting

3
System description
Pipe system components

3.4.3 End caps

3.4.4 Label for aspirating holes

3.4.5 Fastenings

3.4.6 Tools

3.4.7 Adhesive

24 | 48
End cap
Example
Plastic clamp
Pipe cutter
● For fitting on a free pipe end
● The end cap is glued to the pipe
● Material: Typically PVC or ABS depending on
the ambient conditions
● To identify aspirating holes on pipes
● Self-adhesive
● Dimensions: 95 x 24 mm, hole diameter 9 mm
● For attaching the pipes to the wall or ceiling
● The plastic clamps are easy to attach with just
one screw or with cable ties
● Pipe can be installed and removed without the
need for tools
● Material: Typically PVC or ABS depending on
the ambient conditions
● Pipe cutter for trimming the piping
● For gluing pipes to fittings
● Adhesive suitable for creating connections
with high tensile strength on ABS or PVC
pipes
A6V11783979_en--_a