Cleaning; Storage - Silvercrest SSMS 600 D1 Operating Instructions Manual

7. Cleaning

Clean the device prior to its first use!
DANGER! Risk of electric
shock!
Pull the mains plug 1 out of the
wall socket before you clean
the device.
The motor unit 2, drive cover 3, beater
adapter 4, power cable and mains
plug 1 must not be immersed into water
or other liquids.
DANGER! Risk of injury from
cutting!
When washing manually, the water
should be sufficiently clear that you can
see the blade easily.
Do not clean any part in the dishwash-
er
WARNING! Risk of material dam-
age! Do not use any astringent or abrasive
cleaning agents.
Wiping off
Wipe off the motor unit 2, the drive cover 3
and the beater adapter 4 using a slightly
damp cloth.
Washing-up
• All other parts (blade insert 5, beater 6,
cover/base for the chopper 7, chopper
9, blender 10, measuring beaker with
cover/base 17) can be washed up by
hand in warm water with detergent.
• Then rinse off the parts with clear water.
• Dry all parts carefully, before reassem-
bling the device and storing it.
Some cleaning tips
• Preferably clean the blender 10 imme-
diately after use, to prevent food resi-
dues from drying on and sticking to the
hand blender.
• After processing very salty foodstuffs,
the blender 10 should be rinsed imme-
diately.

8. Storage

DANGER for children! Keep the
device out of the reach of children.
DANGER! In order to avoid accidents, the
mains plug 1 must never be connected to a
wall socket while in storage.
• Select a location where neither high
temperatures nor moisture can affect the
device.
• Do not store food for more than 24
hours in the containers. This also ap-
plies to storage in the refrigerator.
• You may suspend the motor unit 2 at the
eyelet 14.
11
GB