Cleaning And Care - Silvercrest SSK 400 A1 Installation, Operating And Safety Information

Place the drive unit
4
surface�
Place the blender jug
Turn the blender jug
locks into place�
Add the ingredients into the blender jug
�
7
Place the lid on the blender jug
2
turn it clockwise until it audibly locks into
place�
Insert the lid plug
1
the mains plug into a socket that has been
correctly installed� Observe the
requirements in the chapter "Technical
data" and on the identification plate.
Turn the control knob
function) or "1"
11
9
For continuous blending, start at "1"
and increase it to "2"
blending time if necessary�
Switch the product off for at least 10
minutes after 3 minutes of continuous
operation�
If you want to subsequently add fine herbs/
spices or liquids, turn the knob to "0"
and wait until the blender comes to a halt�
Unplug the mains plug from the power
outlet�
Now open the lid plug
blending ingredients and reinsert the lid
plug�
Reconnect the mains plug to the power
outlet and turn the control knob
(pulse function) or "1"
11
the blending process�
If you want to subsequently add larger
pieces or foodstuffs, turn the knob to "0"
and wait until the blender comes to a
8
halt�
Unplug the mains plug from the power
outlet�
Turn the lid and lift it off the blender
2
jug, then add the blending ingredients and
close the lid again�
Reconnect the mains plug to the power
outlet and turn the control knob
on an even, stable
on the drive unit�
7
clockwise until it
7
and
7
into the lid � Insert
2
to "P" (pulse
5
�
9
after a short
10
8
, add the
1
to "P"
5
to continue
9
to "P"
5
(pulse function)
11
the blending process�
Pour the finished mixture into a suitable
container�
z Cleaning and care
CAUTION! Risk of electric
shock! Moisture in the product can
lead to short circuit and electric
shock�
Always unplug the mains plug from the
socket before cleaning the product�
The drive unit must not be immersed in
4
water or any other liquids, or held under
running water�
Ensure that no water or other fluids can
enter the housing�
Dry the product thoroughly before using it
again after cleaning�
CAUTION! Risk of damage!
Improper handling of the product
may result in damage to the
product�
Do not use aggressive cleaning agents,
brushes with metal or nylon bristles, or any
sharp or metallic cleaning implements such
as knives, hard spatulas or similar objects�
These may damage surfaces�
Regularly inspect the product for soiling�
Remove any dirt to ensure the product
works correctly�
Never put the drive unit
dishwasher� It would be destroyed�
Cleaning
Wipe down the drive unit
moistened cloth�
You can wash the blender jug
lids in the dishwasher (max. 65 °C) or by
hand with a mild detergent�
Allow all parts of the product to dry
completely after cleaning�
or "1" to continue
9
in the
4
with a slightly
4
and the
7
GB/CY
11