Heat-Up; Cleaning And Care; Cleaning The Blender Jug - Silvercrest SSK 300 A1 Operating Instructions Manual

9) To interrupt the cooking process, press the
KOCHEN/DAMPF button q or the EIN/AUS
button e.
10) Remove the lid 2 carefully.
11) Remove the egg insert 7 from the blender
GB
jug 3.

Heat-up

You can also reheat soups that you have made
earlier with the appliance.
NOTE
► Before using the ERWÄRMEN function, the
blender jug 3 must be cleaned thoroughly.
Ensure that no food residue remains at the
bottom of the appliance.
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Pour in the soup to be heated up.
3) Press the EIN/AUS button e. The appliance
emits an acoustic signal. All control lamps
fl ash.
4) Press the ERWÄRMEN button r. Two signal
tones will confi rm your selection and the cor-
responding signal lamp will fl ash.
The heating of the soup now takes place automatic-
ally: The appliance heats and mixes alternately.
As soon as the heating process is complete, the
appliance will stop automatically.
NOTE
► You can stop the heating process at any time
by pressing the EIN/AUS button e or the
ERWÄRMEN button r. The control lamp then
goes off and the appliance switches itself off .
22

Cleaning and care

It is best to clean the appliance as soon as it has
cooled down after each use. Dried-on food residue
is more diffi cult to remove.

Cleaning the blender jug

DANGER – ELECTRIC SHOCK!
► Ensure that no liquids come into contact with
the electrical connector on the blender jug 3!
NEVER immerse the blender jug 3 in
water or other liquids! Otherwise there
is a risk of an electric shock.
WARNING! RISK OF INJURY!
Take care when cleaning the blender jug 3.
►
The blade 4 is very sharp!
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Add a little warm water and a drop of
washing up liquid to the blender jug 3.
3) Close the lid 2.
4) Press the EIN/AUS button e.
5) Press the PULSE button t and allow the
appliance to run for about 1 minute.
6) Remove the plug from the mains power socket.
7) Remove stubborn remains using the cleaning
brush 8 or the cleaning sponge 0. The narrow
side of the cleaning brush 8 is particularly
well-suited to removing food residue from the
bottom of the appliance.
8) Afterwards, empty the container and rinse it
out thoroughly with clear water.
SSK 300 A1