Hitachi HIDIC EH-150 Applications Manual page 11

Chapter 1
1.1 Before use
This instruction manual describes how properly operate the EH-POS (Positioning Control Module),
which is one of the special function module of EH-150 Programmable Logic controller (PLC).
Carefully read this manual to familiarize yourself with the procedures respectively of installation,
operation, and maintenance and inspection.
Please be sure to read the related application manual, too.
item
PLC Main body
Programming
Software
*The last character of the manual number may be modified when the product is revised.
Use EH-CPU308 or EH-CPU316 for CPU module with EH-POS.
l
When EH-CPU104 or EH-CPU208 is used, confirm ROM Version 02 or more. In this case, access
l
to external output area of the slot, on which high function module such as EH-POS is attached,
can not be executed by double word (DY), but it is possible by word (WY).ROM Version 01 and
less can not be used.(Please show the left side of CPU module)
EH-POS is different from H-series positioning module POSIT-H, POSIT-2H, POSIT-A2H,POSH
l
in detailed specifications. To transplant an existing user program for EH-POS, read the both
manuals carefully and understand the difference. See the Chapter 12 for the difference between
POSIT-2H (2 axis pulse positioning module) and EH-POS.
Read this manual carefully before using EH-POS to operate the module correctly.
l
Contents of the manual may be changed without notice.
l
Introduction
Table 1.1
EH-150 Application Manual
Ladder Editor for Windows® V1.25 Instruction Manual
(Type:HLW-PC3)
Ladder Editor for Windows® V2 Instruction Manual
(Type:HLW-PC3)
Pro-H
Reference Manual list
Document name
Cautions
1-1
Capture 1 Introduction
Manual No.
NJI-281*(x)
NJI-206C
NJI-299