Routine Care; General Cleaning Safety Precautions; Cleaning The Computer Case; Cleaning The Monitor - HP RP2 2000 Maintenance And Service Manual

Retail system
Hide thumbs Also See for RP2 2000:
Table of Contents

Advertisement

Routine care

General cleaning safety precautions

1.
Never use solvents or flammable solutions to clean the computer.
2.
Never immerse any parts in water or cleaning solutions; apply any liquids to a clean cloth and then use
the cloth on the component.
3.
Always unplug the computer when cleaning with liquids or damp cloths.
4.
Always unplug the computer before cleaning.

Cleaning the Computer Case

Follow all safety precautions in
computer.
To clean the computer case, follow the procedures described below:
To remove light stains or dirt, use plain water with a clean, lint-free cloth or swab.
For stronger stains, use a mild dishwashing liquid diluted with water. Rinse well by wiping it with a cloth
or swab dampened with clear water.
For stubborn stains, use isopropyl (rubbing) alcohol. No rinsing is needed as the alcohol will evaporate
quickly and not leave a residue.
After cleaning, always wipe the unit with a clean, lint-free cloth.
Occasionally clean the air vents on the computer. Lint and other foreign matter can block the vents and
limit the airflow.

Cleaning the monitor

Wipe the monitor screen with a clean cloth moistened with water or with a towelette designed for
cleaning monitors. Do not use sprays or aerosols directly on the screen; the liquid may seep into the
housing and damage a component. Never use solvents or flammable liquids on the monitor.
To clean the monitor body follow the procedures in

Service considerations

Listed below are some of the considerations that you should keep in mind during the disassembly and
assembly of the computer.

Power supply fan

The power supply fan is a variable-speed fan based on the temperature in the power supply.
CAUTION:
The cooling fan is always on when the computer is in the "On" mode. The cooling fan is off when
the computer is in "Standby," "Suspend," or "Off" modes.
You must disconnect the power cord from the power source before opening the computer to prevent system
board or component damage.
General cleaning safety precautions on page 15
before cleaning the
Cleaning the Computer Case on page
15.
Routine care
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp2 2020Rp2 2030

Table of Contents