Battery - HP RP2 2000 Maintenance And Service Manual

Retail system
Hide thumbs Also See for RP2 2000:
Table of Contents

Advertisement

7.
Slide the hard drive out of the carrier
Reverse the removal procedures to install a hard drive.
When installing the hard drive assembly, make sure the thermal pad is installed on the hard drive.

Battery

The battery that comes with the computer provides power to the real-time clock. When replacing the battery,
use a battery equivalent to the battery originally installed in the computer. The computer comes with a 3-
volt lithium coin cell battery.
WARNING!
The computer contains an internal lithium manganese dioxide battery. There is a risk of fire and
burns if the battery is not handled properly. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose to temperatures higher than 60°C (140ºF).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace the battery only with the HP spare designated for this product.
38
Chapter 5 Removal and replacement procedures

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp2 2020Rp2 2030

Table of Contents