ABB RELION REX640 Operation Manual page 55

1MRS759118 D
2.
REX640
Operation Manual
Tap to open or
Figure 36: Selecting object (circuit breaker) and control buttons
An interlocked object is indicated by the padlock symbol
single-line diagram.
Breaker operation in Configuration > Control > HMI is set to
If the parameter
"After confirmation", a confirmation dialog box opens after tapping the control
button. The confirmation dialog box has a progress bar indicating the
timeout set for the controllable object. If the Control mode setting of a control
function is set to "sbo-with-enhanced-security", the confirmation dialog box
always opens regardless of the
to close the selected object.
Breaker operation setting value.
Using HMI
in the
Select
55