Huawei LUNA2000-100KTL-M1 User Manual page 55

LUNA2000-100KTL-M1 Smart Power Control System
User Manual
Table 6-1 LED indicators
No Category
.
1 DC indication
2 Running indication
3 Communication
indication
4 Fault/Maintenance
indication
Issue 02 (2023-01-10)
Indicator Status (Blinking
Fast: On for 0.2s and then Off
for 0.2s; Blinking Slowly: On
for 1s and then Off for 1s)
Steady green
Blinking green slowly
Blinking red fast
Off
Steady green
Blinking green slowly
Blinking red fast
Off
Blinking green fast
Off
Steady red
Blinking red fast
Blinking red slowly
Blinking green slowly
Off
Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
Description
The DC side is properly connected,
and the auxiliary power inside the
device is working.
The device is in standby or cable
connection detection state.
An environmental fault occurs on
the DC side.
The DC side is not properly
connected, or the auxiliary power
inside the device is not working.
The device is operating in grid-tied
mode.
The system environment is normal
and the device is not in the working
state.
An environmental fault occurs on
the AC side.
The AC side is not connected to the
power grid.
The device receives data through the
northbound FE ports.
The device has not received data
through the FE ports in at least 10s.
A major alarm is generated on the
device.
A minor alarm is generated on the
device.
A warning is generated on the
device.
The device is under local
maintenance or shuts down after
receiving a command.
No alarm is generated, and no local
maintenance operations are
performed.
49