Connecting The Dc Power Cable - Huawei LUNA2000-100KTL-M1 User Manual

LUNA2000-100KTL-M1 Smart Power Control System
User Manual
Figure 5-7 (Optional) Replacing the crimping module (on the AC side)
----End
Follow-up Procedure
Use scissors to cut off the joints of the rubber rings in order to remove them.
Remove all rubber rings in the same way.
Figure 5-8 Removing the rubber ring

5.6 Connecting the DC Power Cable

Precautions
Before connecting the DC power cables, check the following items:
●
●
Issue 02 (2023-01-10)
NO TE
Remove the rubber rings according to the cable diameter range, and ensure that the
crimping module is not damaged. Otherwise, the device may fail to offer the expected level
of protection.
Check that the DC switches between the DC side of the Smart PCS and the DC
LV Panel busbar are in the OFF position.
Check the polarities of the cables and label them properly.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
39