Huawei LUNA2000-100KTL-M1 User Manual page 79

LUNA2000-100KTL-M1 Smart Power Control System
User Manual
Table 7-1 Maintenance checklist
Check Item
● Cleanness of
● Cleanness of
● Fans
System running
status
Cable
connections
Grounding
reliability
Removing the Air Inlet Baffle
Figure 7-1 Removing the baffle
Issue 02 (2023-01-10)
Check Method
● Check whether there is dust on
the air inlet
the air outlet
● Check whether the fans produce
● Check that the Smart PCS is not
● Check that the Smart PCS
● Check that the parameters are
● Check that cables are secured.
● Check that cables are intact,
● Check that the idle COM, USB,
Check that ground cables are
securely connected.
Copyright © Huawei Technologies Co., Ltd.
the air inlet and outlet. If
necessary, remove and clean the
baffles.
abnormal sounds during
operation.
damaged or deformed.
operates with no abnormal
sounds.
set correctly.
and ensure that any parts in
contact with metallic surfaces
are not scratched.
and FE ports are protected by
waterproof caps.
7 Device Maintenance
Maintenance
Interval
Once every 6 to 12
months
Once every 6 months
The first inspection
must be performed 6
months after the
initial commissioning.
Subsequent
inspections can be
performed every 6 to
12 months.
The first inspection
must be performed 6
months after the
initial commissioning.
Subsequent
inspections can be
performed every 6 to
12 months.
73