Setting Feature Parameters - Huawei LUNA2000-100KTL-M1 User Manual

LUNA2000-100KTL-M1 Smart Power Control System
User Manual

6.5.3 Setting Feature Parameters

Procedure
Step 1 Choose Settings > Feature parameters to set feature parameters.
----End
Parameters
No. Category
1 Communication
failure settings
2
3
4
Issue 02 (2023-01-10)
Parameter Description
Communication If this parameter is set to
disconnection Enable, the device performs
fail-safe protection according to the
set power when
communication between the
device and the SmartLogger
is interrupted for a period
longer than Communication
disconnection detection
time.
Communication Specifies the fail-safe
disconnection detection time for
detection time disconnection between the
(s) device and the SmartLogger
or Smart Dongle.
Active power Specifies the protection
mode when threshold of the active power
communication after communication is
fails interrupted. The value can be
a percentage or a fixed value.
Active power Specifies the active power
threshold when threshold in percentage.
communication
fails (%)
Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
Remarks
-
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable.
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable.
This parameter is
displayed when the
protection in the
case of
communication
failure is set to
Enable and Active
power threshold
when
communication
fails is set to a
percentage.
59