Setting The Pq/Vsg Working Mode - Huawei LUNA2000-100KTL-M1 User Manual

LUNA2000-100KTL-M1 Smart Power Control System
User Manual
Figure 7-3 Login
----End

7.2.3 Setting the PQ/VSG Working Mode

Step 1 Connect the Smart PCS to the app.
Step 2 Log in to the app.
Step 3 Choose Settings > Feature parameters, and set Working mode to PQ or VSG.
----End
Issue 07 (2023-07-15)
NO TE
Set the correct grid code based on the application area and scenario of the Smart PCS.
NO TE
● Before setting the VSG mode, ensure that the battery rack in the ESS has power.
● In the on-grid scenario, set this parameter to PQ. In the off-grid scenario, set this
parameter to VSG.
● When the Smart PCS connects to an external power grid, set Working mode of the
Smart PCS to PQ. When the Smart PCS is disconnected from the external power grid (or
there is no external power grid), set Working mode of the Smart PCS to VSG.
● When the Smart PCS and the diesel generator (DG) are running in parallel, set Working
mode of the Smart PCS to PQ or VSG. If the Smart PCS needs to carry loads
independently, set Working mode of the Smart PCS to VSG.
Copyright © Huawei Technologies Co., Ltd.
7 Power-On and Commissioning
58