Table of Contents
Advertisement
LUNA2000-100KTL-M1 Smart Power Control System
User Manual
4.1 Installation Requirements
4.1.1 Site Selection Requirements
●
●
●
●
●
●
●
●
●
●
●
Issue 07 (2023-07-15)
4
Do not install the Smart PCS in working or living areas.
If the Smart PCS is installed in public places (such as parking lots, stations,
and factories) other than working and living areas, install a protective net
outside the device and set up a safety warning sign to isolate the device. This
is to avoid personal injury or property loss caused by accidental contact by
non-professionals or other reasons during device operation.
Do not install the Smart PCS in areas with flammable materials.
Do not install the Smart PCS in areas with explosives.
Do not install the Smart PCS in areas with corrosive substances.
The anti-corrosion level of the Smart PCS is C5 Medium. Therefore, the site
must be a class C or better environment but not a class D or E environment.
Do not install the Smart PCS in an easily accessible place, because the voltage
is high and its enclosure and heat sink are hot during operation.
The Smart PCS shall be installed in a well-ventilated environment to ensure
good heat dissipation.
If the Smart PCS is installed in an enclosed environment, a heat dissipation
device or ventilation device shall be installed. The indoor ambient
temperature must not be higher than the outdoor ambient temperature.
The Smart PCS will be corroded in salt-affected areas. Before installing the
Smart PCS outdoors in salt-affected areas, consult the Company. A salt-
affected area refers to a region within 500 m of the coast or prone to sea
breeze. Regions prone to sea breeze vary with weather conditions (such as
typhoons and monsoons) or terrains (such as dams and hills).
The Smart PCS shall be installed more than 30 m away from third-party
wireless communication facilities and residential environments.
Copyright © Huawei Technologies Co., Ltd.
Installing the Smart PCS
4 Installing the Smart PCS
26
Advertisement
Table of Contents
